Dual actuator wastgate

Cyrille · Tweet this Post! #1 (**permalink**) 06-13-2008, 09:49 AM

Hi,
I have a torbonetics internal dual actuator wastgate kit and i would like to know how to plug it.
It seems to be the same thing as pluging external watsgate with vaccum and boost port but i woold like to be sure.

Thanks !
(sorry of my bad english if there is any mistake, but I'm french).

Robert · Tweet this Post! #2 (**permalink**) 06-13-2008, 10:50 AM

Quote:

Originally Posted by Cyrille

Hi,
I have a torbonetics internal dual actuator wastgate kit and i would like to know how to plug it.
It seems to be the same thing as pluging external watsgate with vaccum and boost port but i woold like to be sure.

Thanks !
(sorry of my bad english if there is any mistake, but I'm french).

what do you mean plug it?

Cyrille · Tweet this Post! #3 (**permalink**) 06-13-2008, 11:34 AM

There are 2 ports on the wastgate ... what are the utilities of those 2 ports ?

Robert · Tweet this Post! #4 (**permalink**) 06-13-2008, 02:37 PM

Quote:

Originally Posted by Cyrille

There are 2 ports on the wastgate ... what are the utilities of those 2 ports ?

One is referenced to the compressor outlet to open the wastegate at a specified boost pressure and the other is reference usually to a regulator to hold the gate closed longer for boost control.

Cyrille · Tweet this Post! #5 (**permalink**) 06-16-2008, 02:35 AM

Ok, so I pluged it like this picture :

Is that correct ?

Mike MMA · Tweet this Post! #6 (**permalink**) 09-03-2009, 11:01 AM

Would like to as well, possible to leave one open and connect the other to the compressor housing for base pressure?

Robert · Tweet this Post! #7 (**permalink**) 09-11-2009, 01:25 PM

Quote:

Originally Posted by Mike MMA

Would like to as well, possible to leave one open and connect the other to the compressor housing for base pressure?

Do you have the dual port actuator? If so you would need to make sure you plug the right port in for boost control..

koskotas · Tweet this Post! #8 (**permalink**) 12-09-2009, 06:07 AM

Quote:

Originally Posted by Robert

Do you have the dual port actuator? If so you would need to make sure you plug the right port in for boost control..

Hello ! i am also dealing with problems fitting the double actuator ! Can you please give me a drawing or any reference so see the installation instractions ? Is nessesary to have also boost control to make it work ?