Antisurge cover for T-series

turbojimmy · Tweet this Post! #1 (**permalink**) 02-22-2008, 04:03 AM

Is there an 'anti-surge ported (GT-K or otherwise) compressor that will fit on my BB T70 turbo? I have a nasty part-throttle surge that I'd like to get rid of. BOV didn't work, nor did the Tornado (don't ask).

Thanks,
Jim

Robert · Tweet this Post! #2 (**permalink**) 02-22-2008, 09:59 AM

Quote:

Originally Posted by turbojimmy

Is there an 'anti-surge ported (GT-K or otherwise) compressor that will fit on my BB T70 turbo? I have a nasty part-throttle surge that I'd like to get rid of. BOV didn't work, nor did the Tornado (don't ask).

Thanks,
Jim

Do you know if its a T70 or HP70 compressor wheel?

turbojimmy · Tweet this Post! #3 (**permalink**) 02-22-2008, 10:11 AM

Quote:

Originally Posted by Robert

Quote:

Originally Posted by turbojimmy

Is there an 'anti-surge ported (GT-K or otherwise) compressor that will fit on my BB T70 turbo? I have a nasty part-throttle surge that I'd like to get rid of. BOV didn't work, nor did the Tornado (don't ask).

Thanks,
Jim

Do you know if its a T70 or HP70 compressor wheel?

I honestly don't know. How can I find out?

Thanks,
Jim

ash · Tweet this Post! #4 (**permalink**) 02-24-2008, 01:02 AM

put some pictures of it on here..

ash

ash · Tweet this Post! #5 (**permalink**) 02-24-2008, 01:02 AM

put some pictures of it on here..
also some measurements

ash

turbojimmy · Tweet this Post! #6 (**permalink**) 02-24-2008, 04:15 AM

Quote:

Originally Posted by ash

put some pictures of it on here..
also some measurements

ash

I don't know if these are useful or not, but it's all I have right now. I was comparing the T70 to my old Precision PT-61.

Jim[/img]

Robert · Tweet this Post! #7 (**permalink**) 02-25-2008, 07:55 PM

Just based on the compressor cover I'm going to assume its an older T70 compressor wheel. If thats the case I'm going to shoot from the hip and say there probably isn't one available since the ported housings were designed around the HP70 compressor wheels. I will check and confirm this though..

turbojimmy · Tweet this Post! #8 (**permalink**) 02-26-2008, 04:03 AM

Quote:

Originally Posted by Robert

Just based on the compressor cover I'm going to assume its an older T70 compressor wheel. If thats the case I'm going to shoot from the hip and say there probably isn't one available since the ported housings were designed around the HP70 compressor wheels. I will check and confirm this though..

If that's the case, is it worthwhile to send it in and have it 'upgraded' to the HP70 wheel? Or am I just better off starting over? I like this one because of the Jet Hot coated Precision housing (not that I can't have that done to a new one, but it adds to the cost).

Jim

Robert · Tweet this Post! #9 (**permalink**) 02-26-2008, 09:08 AM

Quote:

Originally Posted by turbojimmy

Quote:

Originally Posted by Robert

Just based on the compressor cover I'm going to assume its an older T70 compressor wheel. If thats the case I'm going to shoot from the hip and say there probably isn't one available since the ported housings were designed around the HP70 compressor wheels. I will check and confirm this though..

If that's the case, is it worthwhile to send it in and have it 'upgraded' to the HP70 wheel? Or am I just better off starting over? I like this one because of the Jet Hot coated Precision housing (not that I can't have that done to a new one, but it adds to the cost).

Jim

I'm going to double check today on the compressor cover before you do that..