T3/T04E 4 bolt Discharge diameter?

Sarg · Tweet this Post! #1 (**permalink**) 12-31-2008, 06:27 PM

Getting a T3/T04E with .63 AR 4 bolt discharge turbine housing and wondering what diameter flange to order. I have seen 2.5" 4 bolt flanges as well as 3" 4 bolt flanges, both for the T3 hotsides. Which diameter does the turbonetics housing use?

Robert · Tweet this Post! #2 (**permalink**) 01-03-2009, 11:51 PM

Quote:

Originally Posted by Sarg

Getting a T3/T04E with .63 AR 4 bolt discharge turbine housing and wondering what diameter flange to order. I have seen 2.5" 4 bolt flanges as well as 3" 4 bolt flanges, both for the T3 hotsides. Which diameter does the turbonetics housing use?

What size T3? Stage 2, 3, 5?

Sarg · Tweet this Post! #3 (**permalink**) 01-04-2009, 07:35 AM

The t3/t04E with a .63 AR hot side and a F1 57 turbine wheel...I guess that is a stage 3 wheel? Are the turbine discharge different on the 57 and the 62?

Robert · Tweet this Post! #4 (**permalink**) 01-04-2009, 04:13 PM

Quote:

Originally Posted by Sarg

The t3/t04E with a .63 AR hot side and a F1 57 turbine wheel...I guess that is a stage 3 wheel? Are the turbine discharge different on the 57 and the 62?

They are different between the F1 and non-F1 turbine housings usually. I'll see if I can dig up the turbine housing dimenstions for you tomorrow.

Sarg · Tweet this Post! #5 (**permalink**) 01-04-2009, 06:55 PM

All of the T3/T04E are F1 turbines right? At least on the site I am looking at they all show up as F1-57, F1-62, etc.

Robert · Tweet this Post! #6 (**permalink**) 01-06-2009, 11:32 AM

Quote:

Originally Posted by Sarg

All of the T3/T04E are F1 turbines right? At least on the site I am looking at they all show up as F1-57, F1-62, etc.

I believe they have started using all F1 wheels by default. I'm still stuck in the old mode I guess where there are non-F1 wheels available.