Turbonetics Owners and their Vehicles Turbonetics Owners and their Turbonetics powered vehicles.

Turbo Kits
Reply
LinkBack Thread Tools Search this Thread Display Modes
updates of my skyline with gtk 850
 
Old 04-24-2008, 04:03 PM
MrB MrB is offline
Turbonetics Enthusiast
 
Join Date: Aug 2007
Location: essex uk
Posts: 25
Send a message via MSN to MrB
Default updates of my skyline with gtk 850

well i decided on a colour change days before the car was going to have the engine put in, after getting quotes of 2.5k to 4k for resprays i decided to dust off the old spray gear and get painting myself.
i went to cars in canvey who let me look through some colours and we decided on a master chroma colour but then add a little bit more of this and a little bit more of that till i got the colour i wanted, the official colour name is Master Chroma Green 6692. we then proceeded to d a the car right back taking any unesecary paint off the car.
heres a few pics of the job through re assemble and i will have the car finnished and totaly back together by tomorow night. rear wing fitted front bumper fitted properly and everything flattened and compounded.
hope you like the green black theme

engine bay blacked


door shuts and shell sorted


doors fitted and bonnet just resting in place

the back end






bumper trial fitted


get the skirts on


and dropped to the floor as thats all ive got time for today, the car will be finnished tomorow so ill get more pics up not bad for 6 days rebuild.
__________________
RB30 gtst skyline driver
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Share on FacebookShare on MySpace
Reply With Quote
Old 04-24-2008, 04:06 PM
MrB MrB is offline
Turbonetics Enthusiast
 
Join Date: Aug 2007
Location: essex uk
Posts: 25
Send a message via MSN to MrB
Default

more pics to come over the weekend once the rest of the body panels are finnished fitting heres the currant spec

spec
Engine Spec

spec
RB30 vl commodore 3ltr block. skimmed and crack tested new sleeves core plugs etc
RB25 2.5ltr 24 valve twin cam head, gas flow and ported and matched and skimmed knife edged ports
Weisco custom made forged Pistons,
Crower billet custom made con rods,
Nitrided & knife edged crank polished & rotation assembly balanced,
billet allie crank pully with atached 32 tooth dry sump pully
280 degree 10.8mm lift tomie inlet gtr camshaft
270 degree 10.25mm lift tomie exhaust gtr camshaft
tomie gtr solid lifters , springs, retainers, shims, guides
Oversized longer valves
Tomie Duralumin adjustable Camshaft pulleys,
0.9mm Steel headgasket,
ARP Main and head stud kits
ACL Race Bearings
1000cc top feed Bosch Injectors,
greddy 11mm billet fuel rail
HKS Iridium Plugs,
Turbonetics GTK850 turbo (rated 875bhp at the wheels )
Turbonetics Racegate wastegate,
Turbonetics Raptor BOV,
Aeromotive 13110 adjustable race fuel regulator 700lph return
Custom made T4 Exhaust manifold,
Custom made 4" downpipe
Full 4" bore Trust Exhaust system 5? tailpipe
Ram ported side mount plenum
90mm throttle body,
Coolmist water / Methanol injection
HKS superflow induction kit,
large 800mm core Front Mount Intercooler with hard pipe set up,
Greddy Aluminium race rad
1x holly blue 180gph fuel pump
2x bosch 044 fuel pumps
2ltr swirl pot
all aeroquip lines and fittings -10s -12 & -8 fuel line and water lines breathers and dry sump oil lines all braided
upgraded water pump
kenlow electric fans
custom IP Racing dry sump kit
electric power steering pump
Haltec E11v2 Plug and Play stand alone ECU,
Haltec Cold air temp sensor ( no AFMs )
Haltec 3 bar Map Sensor,
Haltech Idle Speep control valve
Haltech Throttle position sensor
Haltec Launch Control & full throttle gear shift
Haltec Anti Lag,
Haltec Data Login,
HKS db chrono gauges and control box
Nismo Front strut brace and brake stopper.
Racelogic traction control
Racelogic wheel speed sensors
Custom solid engine, gearbox diff mounts

Transmission
OS Giken 5 speed close ratio gearbox,
OS Giken TS3b Triple plate clutch
OS Giken thrust bearing
Kazz 1.5way diff
Short shifter Kit

Brakes
356mm grooved AP Racing front discs
K Sport 8 Pot Calipers front
Rear 330mm AP racing rear discs
6 pot callipers rear
Hurst roll control line lock
Nismo Brake Stopper
all Braided lines

Suspension
Apex N1 Coilover suspension with adjustable bump and rebound
Front and rear strut braces
Cucso Rear subframe locking Kit
Front adjustable toe arms

Wheels and tyres
For road Anters 249s 10s rear 8.5s front
Front 235/40/18 good year eagle f1's
Rear 265/45/18 good year eagle f1s

Exterior
400r Front Bumper
400r Arch Externsions
Clear side and front indicators
Gandor Style Mirrors
Custom Bonnet Lip
Small bonnet vent
Nismo Rear Boot lip
61" Carbon GT Drift Wing
chrom green respray

Interior
Haltech digital dash
no rear seats
Racing front seats
7 point roll cage with door bars
Alu X2 steering wheel and gear nob
6 point racing harnesses
__________________
RB30 gtst skyline driver
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Share on FacebookShare on MySpace
Reply With Quote
Old 04-24-2008, 07:53 PM
ash ash is offline
Turbonetics Enthusiast
 
Join Date: Jan 2007
Location: Australia
Posts: 148
Default

g'day
where did you find this spec?

Turbonetics GTK850 turbo (rated 875bhp at the wheels )


cheers
ash
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Share on FacebookShare on MySpace
Reply With Quote
Old 04-25-2008, 09:53 AM
MrB MrB is offline
Turbonetics Enthusiast
 
Join Date: Aug 2007
Location: essex uk
Posts: 25
Send a message via MSN to MrB
Default

in my other post on the forum with the old build when i first got the turbo ( its about 5 posts down on ththis area ) this is what robert site admin said to my question regarding what power i could expect from the turbo

"Easily possible. That compressor can flow for 900 WHP or very close to it..."

and i checked this with the company i got it from in the uk and they said it should flow 875 so i thought id take the lower it will be running 2.5bar +
do you know otherwise ?? if you do then any info apreciated i can get the spec right then. it hasnt been run up yet so i aint got a clue what it will run ill know in 4 weeks though and im sure this is the first place ill be telling everyone what its hit

cheers

Brett
__________________
RB30 gtst skyline driver
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Share on FacebookShare on MySpace
Reply With Quote
Old 04-25-2008, 06:25 PM
ash ash is offline
Turbonetics Enthusiast
 
Join Date: Jan 2007
Location: Australia
Posts: 148
Default

Quote:
Originally Posted by MrB
in my other post on the forum with the old build when i first got the turbo ( its about 5 posts down on ththis area ) this is what robert site admin said to my question regarding what power i could expect from the turbo

"Easily possible. That compressor can flow for 900 WHP or very close to it..."

and i checked this with the company i got it from in the uk and they said it should flow 875 so i thought id take the lower it will be running 2.5bar +
do you know otherwise ?? if you do then any info apreciated i can get the spec right then. it hasnt been run up yet so i aint got a clue what it will run ill know in 4 weeks though and im sure this is the first place ill be telling everyone what its hit

cheers

Brett
---------------------------------------------

no, i have no extra info...
just wondering why they would say that...
gtk 850 listed at 700-875 flywheel hp...
page 8 of cataloge..

let us know how it goes

ash
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Share on FacebookShare on MySpace
Reply With Quote
Old 04-25-2008, 11:06 PM
MrB MrB is offline
Turbonetics Enthusiast
 
Join Date: Aug 2007
Location: essex uk
Posts: 25
Send a message via MSN to MrB
Default

will do, ill whack a dyno sheet up as soon as its done

cheers

Brett
__________________
RB30 gtst skyline driver
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Share on FacebookShare on MySpace
Reply With Quote
Old 08-04-2008, 05:16 PM
Moderator
Turbonetics Staff
 
Join Date: Jun 2006
Posts: 47
Default

any update? i love the "kawasaki" green.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Share on FacebookShare on MySpace
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
turbonetics powered nissan skyline gtst RB30/25 MrB Turbonetics Owners and their Vehicles 14 01-17-2008 06:50 AM
Got a Mustang in the garage now! Any turbo updates? r.j-lo Turbonetics Turbo Systems 2 01-09-2008 04:14 PM


All times are GMT -7. The time now is 04:56 PM.
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.3.0