Twin Scroll Housings for F1-57 turbine?

hydra · Tweet this Post! #1 (**permalink**) 08-28-2010, 09:03 AM

Hello there,
I searched high and low and couldn't find any info regarding twin-scroll housing availability for F1-57 turbine wheels... I'd be interested in a T3 or better yet T4 .70 or .84A/R housing for that wheel... Let me know if this is possible, thanks!

Robert · Tweet this Post! #2 (**permalink**) 08-31-2010, 10:57 AM

Quote:

Originally Posted by hydra

Hello there,
I searched high and low and couldn't find any info regarding twin-scroll housing availability for F1-57 turbine wheels... I'd be interested in a T3 or better yet T4 .70 or .84A/R housing for that wheel... Let me know if this is possible, thanks!

The F1-57 is a T3 turbine wheel. i don't believe there are divided housings available but I'll double check.

hydra · Tweet this Post! #3 (**permalink**) 08-31-2010, 11:18 AM

Garrrett make a .78 A/R (which is mediocre at best), as well as .82 and 1.06A/R housings. Would a Garrett housing fit the bill? I was under the impression that was not possible

Robert · Tweet this Post! #4 (**permalink**) 08-31-2010, 02:30 PM

Garrett turbine wheels have a different blade design so no those turbine housings won't work. I double checked and confirmed there is no divided housing for T3 turbine wheels from Turbonetics.