| Tech Support Got a question about a Turbonetics product...here's the place to ask it. |
Need some informations about the Turbo i just bought
07-05-2010, 07:22 AM
|
|
Newbie
|
|
Join Date: Jul 2010
Posts: 4
|
|
Need some informations about the Turbo i just bought
I cound'nt find anything so i hope you can help me.
|
07-06-2010, 12:35 PM
|
 |
Administrator
Turbonetics Owners Club Staff
|
|
Join Date: Jun 2006
Location: Socal
Posts: 4,329
|
|
Unfortunately that serial number is too old to be in the build computer. The compressor housing shows it has a T04E 60 trim compressor but I would need to have the compressor and turbine wheel measurements to tell you for sure.
__________________
2004 Nissan Titan SE KC 4X2: AEM Brute Force Intake, NISMO Exhaust, NISMO Shock Kit, PRG Upper Control Arms, PRG Sway Bar Endlinks, PRG LCA Spacers, Eagle Alloy 17x8, Nitto Terra Grappler 295/75/17, Alpine iXA-W404, Apline Power Pack, Apline KCE-400BT, Alpine Imprint, Alpine Type-R Door Speakers, US Amps USA-400, JBL GTO0804
2004 Nissan 350Z: Turbonetics Stage 1 Turbo System, Apexi WS2, HKS LS+ Coilovers with Swift Springs, Hotchkis Sway Bars, NISMO LSD, NISMO Diff Cover, ACT Clutch, JWT Flywheel, GSpec Short Shifter, Hawk HPS pads, Blitz Upper Raditor Hose, Motordyne 5/16" Plenum Spacer, Volk LE37T 19x8.5 and 19x10.5, Blitz FATT DCIII
|
07-06-2010, 12:42 PM
|
|
Newbie
|
|
Join Date: Jul 2010
Posts: 4
|
|
Quote:
Originally Posted by Robert
Unfortunately that serial number is too old to be in the build computer. The compressor housing shows it has a T04E 60 trim compressor but I would need to have the compressor and turbine wheel measurements to tell you for sure.
|
circa 60mm Turbinewheel in
circa 67mm Turbinewheel out
I can't messure it better. I hope that's enough you have to know 
So much thanks for so fast help!
|
07-06-2010, 12:44 PM
|
|
Administrator
Turbonetics Owners Club Staff
|
|
Join Date: Jun 2006
Location: Socal
Posts: 4,329
|
|
Quote:
Originally Posted by soren
circa 60mm Turbinewheel in
circa 67mm Turbinewheel out
I can't messure it better. I hope that's enough you have to know
So much thanks for so fast help! |
Unfortunately its not. I would need the measurements outlined in the below thread to tell you for sure what it is.
http://turboneticsinc.com/forum/tech...tics-unit.html
__________________
2004 Nissan Titan SE KC 4X2: AEM Brute Force Intake, NISMO Exhaust, NISMO Shock Kit, PRG Upper Control Arms, PRG Sway Bar Endlinks, PRG LCA Spacers, Eagle Alloy 17x8, Nitto Terra Grappler 295/75/17, Alpine iXA-W404, Apline Power Pack, Apline KCE-400BT, Alpine Imprint, Alpine Type-R Door Speakers, US Amps USA-400, JBL GTO0804
2004 Nissan 350Z: Turbonetics Stage 1 Turbo System, Apexi WS2, HKS LS+ Coilovers with Swift Springs, Hotchkis Sway Bars, NISMO LSD, NISMO Diff Cover, ACT Clutch, JWT Flywheel, GSpec Short Shifter, Hawk HPS pads, Blitz Upper Raditor Hose, Motordyne 5/16" Plenum Spacer, Volk LE37T 19x8.5 and 19x10.5, Blitz FATT DCIII
|
07-06-2010, 12:50 PM
|
|
Newbie
|
|
Join Date: Jul 2010
Posts: 4
|
|
Oh wow, that's to much for me  . I am a noob with turbos. I just started with that.
On the Housing also stands: 20c393-81 96
|
07-06-2010, 01:18 PM
|
|
Administrator
Turbonetics Owners Club Staff
|
|
Join Date: Jun 2006
Location: Socal
Posts: 4,329
|
|
Unfortunately without that wheel measurements I can' t be 100% sure what's in the housings.
__________________
2004 Nissan Titan SE KC 4X2: AEM Brute Force Intake, NISMO Exhaust, NISMO Shock Kit, PRG Upper Control Arms, PRG Sway Bar Endlinks, PRG LCA Spacers, Eagle Alloy 17x8, Nitto Terra Grappler 295/75/17, Alpine iXA-W404, Apline Power Pack, Apline KCE-400BT, Alpine Imprint, Alpine Type-R Door Speakers, US Amps USA-400, JBL GTO0804
2004 Nissan 350Z: Turbonetics Stage 1 Turbo System, Apexi WS2, HKS LS+ Coilovers with Swift Springs, Hotchkis Sway Bars, NISMO LSD, NISMO Diff Cover, ACT Clutch, JWT Flywheel, GSpec Short Shifter, Hawk HPS pads, Blitz Upper Raditor Hose, Motordyne 5/16" Plenum Spacer, Volk LE37T 19x8.5 and 19x10.5, Blitz FATT DCIII
|
07-06-2010, 01:22 PM
|
|
Newbie
|
|
Join Date: Jul 2010
Posts: 4
|
|
I have no messurementtols which can messure so deep down 
|
07-06-2010, 04:52 PM
|
|
Newbie
|
|
Join Date: Jul 2010
Posts: 6
|
|
you have to take turbo apart to measure, compressor and turbine housings need to be removed then mearsure the wheels as described above
|
07-12-2010, 11:30 AM
|
|
Newbie
|
|
Join Date: Jul 2010
Posts: 1
|
|
I have the same Turbo. The Guy I bought it from said it was a CPT44. spools on my car at about 3000 rpm. I'm thinking its a 60. Not sure.
|
 |
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -7. The time now is 04:51 PM.
Powered by vBulletin® Version 3.8.2 Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.3.0
|
