hi robert... sorry for getting back so late. i had to buy a digital vernier to measure the wheels.
I took out the compressor wheel so i can attach pictures and take acutal measurements of the inducer and exducer both. Inducer is 2.298" and exducer is 3.00"
I have attached pictures of the compressor wheel, if they would help in identification. notice the fins are round from the edges and its not a usual type of wheel u get to see. probably someone could shed some light on the type of wheel it is.
As for the turbine. the exducer is 2.296"
There is no sticker or tag for ID on the backside of the backplate and also no signs of any sort of sticker or id remains incase it was there before n has been taken off. the only part numbers are on the front of the plate (pictured before) 20377 and L2203-6. Also a picture shows the compressor wheel part number shaved off (is that ok? does turbonetics do that on purpose?)
thanks ppl
|